|
Lathe Machines |
REPL brand lathe machines are intended for wide variety of application such as oil country, steel & paper mills, power plants, ship building, mining and textile industries.
These rugged machines are designed to provide the precision you expect and rigidity and reliability required by modern demanding application as stated above and it is also useful for production oriented users. High chip cutting power, Precision and universality are the featured characteristics of extra heavy duty Lathes series. |
Heavy Duty Lathe Machines |
| |
|
|
|
Specifications
(Dimensions
are in mm) |
Model 1 |
Model 2 |
Model 3 |
Model 4 |
Model 5 |
Model 6 |
Model 7 |
Length of Bed |
1670 (5'6") |
2130 (7') |
2740 (9') |
3040 (10') |
3650 (12') |
4260 (14') |
4870 (16') |
Max. Admit between |
535 (1'9") |
990 (3'3") |
1600 (5'3") |
1905 (6'3") |
2515 (8'3") |
3125 (10'3") |
3735 (12'3") |
Power of AC
Motor |
2 HP |
2 HP |
3 HP |
3 HP |
3 HP |
3 HP |
5 HP |
3 hp (1440 RPM) |
1350 |
1500 |
1600 |
1800 |
2000 |
2200 |
2400 |
Centres :
Height of Centre
Width of Bed
Max. Swing over bed dia
Max. Swing without gap dia
Max. Over cross slide dia
Width of gap in front of face plate
Hole of spindle
Taper of centres
Lead Screw & Pitch
No. of inch threads & range
No. of metric threads & range
No. of spindle speeds |
254 (10")
323 (12 3/4")
480 (1'7")
785 (2'7")
280 (11")
205 (8")
52 (2 1/8")
MT4
38 (4 TPI)
19 (2 to 24 TPI)
13 (1 to 6 mm Pitch)
8 (25 to 460 RPM) |
|
Note : Any alteration in specifications as per customer's requirement are welcome. OLYMPIC lathe will be available with Hardened Bed ways too.
Standard Accessories
- Face Plate
- Dead Centres 2 Nos.
- Centre Adapter
- Change Gear set to cut BSW Thread & mm thread 16 Nos.
- Tool Post Key
- Motor Pulley
- Carrier Plate
As improvements are made from time to time, these specifications are subject to change without notice.
Bed
The bed is made of close grain cast iron with required hardness and seasoned after rough machining to avoid stresses. Cross ribs of the bed are strongly braced with rigid frame work to maintain the initial accuracy of the lathe for life time. Gap has been provided.
Head Stock
Head stock is of cone pulley type. Spindle having through bore is made from special steel and running in a wide designed pair of bronze metal bearings. It is ground precisely, speed reducing gears are of closed grain cast iron. Precision cut teeth and accurate axial mounting gives smooth running.
Apron
Self operating system for the saddle. It is double walled, oil bath lubrication all the gears inside are hob-cut. Inter locking system is provided to avoid double engagement.
Saddle
The saddle is mounted on V and flat ways of the bed. The carriage has a long bearing on the bed. This carries the cross slide, the compound rest. Square tool post operating screws are fitted with micrometer dials. A dial indicator is provided to facilitate engagement of the lead screw for thread cutting.
Tail Stock
It has long bearing on bed ways and can be off set for long taper turning operations. The bore in which quill moves is fine honed. M. T. 4 taper nose of quill allows the use of drill and reamer. |
|
Extra Heavy Duty Lathe Machine |
| |
|
|
|
Specification |
No. |
Specifications |
Model 01 |
Model 02 |
Model 03 |
Model 04 |
1 |
Length of Bed (mm) |
3000 to 9100 |
3000 to 12500 |
3000 to 12500 |
3000 to 12500 |
2 |
Admit between center (mm) |
1900 to 7900 |
1750 to 11300 |
1500 to 10800 |
1000 to 11400 |
3 |
Height of center (mm) |
300 to 375 |
375 to 450 |
450 to 600 |
600 to 750 |
4 |
Bed width (mm) |
375 |
450 |
600 |
750 |
5 |
Swing over bed (mm) |
600 to 750 |
750 to 900 |
900 to 1200 |
1200 to 1500 |
6 |
Swing over cross slide (mm) |
350 to 500 |
450 to 600 |
550 to 850 |
850 to 1150 |
7 |
Swing over gap (mm) |
900 to 1125 |
1000 to 1200 |
1200 to 1500 |
1750 to 2050 |
8 |
Spindle bore (mm) |
52/80/100 |
80/100/125 |
100/125/150 |
125/150/180 |
9 |
Spindle R.P.M. |
25 to 500 |
20 to 400 |
15 to 300 |
10 to 200 |
10 |
Spindle speed Nose/range |
|
|
|
|
|
Brass type R.P.M. |
8/25 to 500 |
8/20 to 400 |
8/15 to 300 |
8/10 to 200 |
|
Bearing type R.P.M. |
8/40 to 550 |
8/30 to 500 |
820 to 350 |
8/15 to 250 |
11 |
Tail stock sleeve travel (mm) |
200 |
250 |
250 |
250 |
12 |
Tail stock ram dia. (mm) |
60 |
76.2 |
76.2 |
101.6 |
13 |
Cross slide travel (mm) |
300 |
375 |
450 |
600 to 700 |
14 |
Top slide travel (mm) |
150 |
175 |
175 |
200 |
15 |
Main motor H.P./R.P.M. |
3 / 1440 |
5 to 10 / 1440 |
7.5 to 15 / 1440 |
10 to 20 / 1440 |
16 |
Taper in sleeve |
MT - 6 |
MT - 6 |
MT - 6 |
MT - 6 |
17 |
Lead screw dia./threads (TPI) |
38/2 |
50/2 |
50/2 |
50/2 |
|
|
Heavy Duty all Gear |
| |
|
|
|
267 GEAR HEAD
TECHNICAL DATA AND SPECIFICATIONS FOR STANDARD MODELs |
|
STD C.H. |
12” C.H. |
Centre Height over flat bed ways : |
267 m.m. |
305 m.m. |
Swing Over Bed : |
525 m.m. |
600 m.m. |
Swing Over Cross Slide : |
300 m.m. |
375 m.m. |
Swing In Gap : |
830 m.m. |
910 m.m. |
Length of Gap in front of Face Plate : |
200 m.m. |
200 m.m. |
|
Width of Bed :STANDARD 325 m.m. (13”) / OPTIONAL : 375 m.m. (15”) |
|
|
MODEL |
ADMIT
BETWEEN
CENTRES |
LENGTH
OF BED |
Floor Space
Occupied (m.m.) |
Aprox. Weight
in kgs. |
Aprox. Case
Dimensions
(m.m.) |
Nett. |
Gross |
1 |
525 m.m. |
1675 m.m. (5’-6”) |
2200 x 1450 |
1450 |
1750 |
2400 x 1300 x 1600 |
2 |
1000 m.m. |
2135 m.m. (7’) |
2660 x 1450 |
1500 |
1900 |
2850 x 1300 x 1600 |
3 |
1600 m.m. |
2745 m.m. (9’) |
3140 x 1450 |
1650 |
2150 |
3350 x 1300 x 1600 |
4 |
1900 m.m. |
3050 m.m. (10’) |
3500 x 1450 |
1900 |
2450 |
3700 x 1300 x 1600 |
5 |
2500 m.m. |
3660 m.m. (12’) |
4110 x 1450 |
2050 |
2650 |
4300 x 1300 x 1600 |
6 |
3100 m.m. |
4270 m.m. (14’) |
4720 x 1450 |
2350 |
2950 |
5000 x 1300 x 1600 |
7 |
3710 m.m. |
4875 m.m. (16’) |
5330 x 1450 |
2700 |
3400 |
5550 x 1300 x 1600 |
|
|
|
|
|
|
|
|
|
Type of Spindle Nose
Spindle Morse Taper
Spindle Adapter Morse
TaperSpindle Speeds
Nos. / RPM / Range
Spindle Mounting on
Spindle Mounting on |
: A 2 – 6
: MT-6
: MT-4
: 12 (30, 43, 55, 85, 115, 160, 210,
: 285, 400, 545, 785, 1060. RPM )
: Taper Roller Bearings
: Taper Roller Bearings |
|
TAIL STOCK SPINDLE : Diameter : 60.3 m.m. / Travel : 180 m.m. / Morse Taper : MT-4 |
LEADING SCREW : Diameter / Threads : 38 m.m. / 4 TPI |
THREADS |
Nos. of Threads / Range For Fully orton Gearbox) |
Metric :
Inch : |
17 / 0.5 m.m. To 15 m.m. Pitch
40 / 2 to 60 TPI |
FEEDS |
Nos. of Feeds / Range For Fully norton Gearbox) |
Longitudinal :
Cross : |
40 / 0.066 to 2 m.m. / rev. of spindle
40 / 0.0165 to 0.5 m.m. / rev. of spindle |
|
ELECTRICALS : |
Electirc motor of 3 HP / 2.25 k.w., 3 Phase, 1440 RPM with Panel board wirings, over load relay, Pushbutton switches, V-belts and fittings. |
STANDARD ACCESSORIES :
Flame Hardened bed ways,
Chuck back plate 1 no, centre adapter, Dead centres (MT - 4) 2 nos, Tool Post Spanner, Motor pulley, Thread dial indicator, Change gear set - 1 (For metric and inch both) and Norton gearbox.
|
NOTE : |
(1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
(2) The descriptions of standard accessories confirms to it's list and not the photograph of the machine show in the catalogue.
|
|
EXTRA ACCESSORIES :
Face plate, Carrier plate, steady rest, follow rest, Taper turning attachment, ortoned coolant pump with tank and fittings, Rear tool post with extended cross slide, Chuck back plates (Extra), and Electricals (Motor, Panel board, Wirings, Push button Switches, V-belts and fittings), Electrical Switch shaft and chip guard.
|
|
|
|
| ----------------------------------------------------------------------------------------------------------------------- |
| |
|
|
